1/8″ Carbide Single flute Compression bit

Solid Carbide Single Flute Compression bit.

1/8″ diameter shank

1/8″ Cutting edge diameter

3/4″ Length of Cut

1 3/4″ Overall length

This single flute compression bit was specifically design with high RPM routers in mind. Single flute design allows for better chipload when using the higher RPM’s that many Hobby machine achieve. Better chipload means cleaner cuts with longer life.

A compression bit is the combination of both upcut and downcut spirals. Typically, a compression spiral has an upcut single, double or triple flute at the tip of the cutter, approximately one third of the cutting length. When run at full depth, the bit leaves a sharp, clean edge on both sides of your workpiece.

Recommend cutting material:

• Laminate
• Laminated Plywood
• Melamine
• Melamine Particle Board
• MDF/HDF
• Oriented Strand Board (OSB)*
• Particle Board
• Softwood/Hardwood
• Veneered Plywood