1/8″ Carbide 2 flute Compression bit

$20.50

Solid Carbide 2 Flute Compression bit.

1/8″ diameter shank

1/8″ Cutting edge diameter

1.125″ Length of Cut

2″ Overall length

Recommend Settings

  • RPM – 18000RPM
  • Plunge – 35IPM
  • Feed – 60IPM

A compression bit is the combination of both upcut and downcut spirals. Typically, a compression spiral has an upcut single, double or triple flute at the tip of the cutter, approximately one third of the cutting length. … When run at full depth, the bit leaves a sharp, clean edge on both sides of your workpiece.

70 in stock